- All Terrain Vehicle

Model Information

8 wheel drive amphibious utility vehicle with a liquid-cooled 3 cylinder B&SD Naturally Aspirated Gasoline engine producing 31 HP at 3600 rpm and 50.5 ft lbs of torque at 2200 rpm. Mid engine and transmission design, fully enclosed occupant ROPS cab, 10 cubic ft rear cargo area and 1500 lb payload capacity.

Optional 34 HP engine available

Features

Automotive steering, brake and accelerator controls
Conventional "H" pattern HI, LOW and REV shift control
Insulated cab with front and rear windshield, wiper and roof
Low fuel consumption even under severe load conditions

Standard Equipment

12 Volt outlet for portable equipment
Full length skid plate for lower body protection
Voltmeter, Hour Meter, Coolant Temperature, Tachometer, Fuel Level
Low oil pressure, low electrical Warning Lights
Manually controlled choke
Swing out steel frame, canvas wrapped doors
25" Goodyear Rawhide III Tires

Specifications

Engine	DM 950G (Gasoline) Briggs & Stratton Daihatsu
Type	Naturally aspirated gasoline in-line 3 cylinder, 4 cycle, liquid cooled
Horsepower	31 @ governed 3600 rpm
Displacement	952 cc (58 cu. in.)
Torque	50.5 ft. lbs. @ 2200 rpm
Electrical	12 volt, 60 amp alternator, 600 CCA battery, dash mounted manual choke
Brakes	Foot pedal operated hydraulic disc brakes with hand lever operated mechanical parking brake
Steering	Hydrostatic skid steering
Driver Controls	Conventional automotive type steering wheel, brake pedal and foot throttle; dash mounted key operated ignition/starter switch, high/low beam headlamp switch, tachometer/hourmeter, fuel level and coolant temperature gauges; warning lights for low oil pressure and low electrical charge rate
Clutch and Transmission	Continuously variable belt driven torque converter (CVT). High and low range forward, neutral and reverse transmission controlled by a conventional shift pattern range selector.
Final Drive System	RC60 roller chains from transmission to eight 1.59" (40mm) diameter axles. Fully adjustable tensioner for each drive chain. Tapered roller bearings in an oil bath support each axle.
Frame	Powder coated, 3 inch tubular steel, lower body support pan, welded construction. FEA analyzed for strength and durability.
Body	Vacuum formed lower hull and standard full skip plate formed from high density polyethelene (HDPE)
Load Capacity - On Land	1500 lbs/680 kg
Load Capacity - On Water	700 lbs/320 kg
Towing Capacity	2000 lbs/907 kg of drawbar pull
Seating Capacity	Front bench seat for two persons on land/two persons on water
Fuel Capacity	12.6 U.S. gal./48 litres providing approx. 10 hours of operation
Speed - On Land	28 mph/45 km/h
Speed - On Water	2.5 mph/4 km/h
Shipping Weight	2100 lb/950 kg
Tires	Goodyear Rawhide III AT25 x 11.50 - 9 NHS
Vehicle Weight	2100 lbs/950 kg Unladen, 2420 lbs/1100 kg Unladen with Multi-purpose tracks, 3600 lbs/1633 kg Laden
Ground Pressure Tires	Zero Penetration 5 PSI/34 kPa
Ground Pressure Multi Purpose Tracks	Zero Penetration 1.5 PSI/10 kPa Laden: 2.2 PSI/15 kPa 3" of Penetration 1.0 PSI/6.8 kPa Laden: 1.4 PSI/9.5 kPa
Ground Pressure Snow Tracks	Zero penetration 0.7 PSI/4.8 kPa Laden: 1.0 PSI/6.8 kPa 3" of Penetration 0.6 PSI/4.1 kPa Laden: 0.9 PSI/6.1 kPa
Ground Clearance	8"/200 mm to centre of lower body
Operating Conditions	All weather, all terrain, -40F to +104F (-40C to +40C)
Transport	Truck, trailer or helicopter lift